This guide will help you flash stock lenovo firmware on your lenovo vibe k5 plus
Tested on
------------
> My lenovo vibe k5 plus A6020a46
Requirements
-----------------
> PC with windows 7 os or newer [mine is win7]
> .NET framework 4.0 or newer must be installed.
> Lenovo vibe k5 plus
Downloads
--------------
> Lenovo USB driver & QPST Tools
> Lenovo Firmware Image
CLICK HERE TO DOWNLOAD
Installations
-----------------------
> Extract the downloaded archive using any archive software like winRAR or 7zip etc.
> Better put the extracted folder to the desktop [optional].
> Disconnect your phone from pc, if connected.
> Now go inside drivers folder and install lenovo usb driver.
> While installing usb driver, if windows security message pop-up then choose install the driver anyway and proceed.
> Then install the Qualcomm usb driver.
> After driver installation, go to Tools folder and run the setup.exe to install msvc++ redist.
> After the installation, run the QPST2.7.437.exe installer and install the software.
Flashing procedure /* AT YOUR OWN RISK */
------------------------
> Switch off your phone
> Now press and hold the vol+ and vol- button simultaneously and connect the phone to PC.
(Your phone will turn on with nothing being displayed on your phone)
> Wait for the driver to be installed.
> If the driver installation is successful then you will see your device port listed in device manager
under Ports (COM & LTP) > Qualcomm HS-USB QDLoader 9XXX (COMX)
Screenshot of Device Manager
> Now in windows goto Start>All Programs>QPST and open/run QFIL application
( In QIFL application )
> select on Flat Build
> Now click on browse button for programmer path and select on "prog_emmc_firehose_8936.mbn" file which is located in extracted folder/images/
> Now click on Load XML button and select rawprogram0 file and then select patch0 file which is also located in the extracted folder/images/
Here is a screenschot
> Now click on select port button
> Then select your port and click ok.
>> NOW YOUR PC IS READY TO FLASH <<
> Now click on download button to flash.
[ A blue progress bar will display the progress ]
[ If the status is saying invalid path then close the program and select the files and try again ]
> After the flashing is done (check status), remove your phone from pc.
> Remove and reinsert phone's battery and press power button to turn it on.
> Done.
Tested on
------------
> My lenovo vibe k5 plus A6020a46
Requirements
-----------------
> PC with windows 7 os or newer [mine is win7]
> .NET framework 4.0 or newer must be installed.
> Lenovo vibe k5 plus
Downloads
--------------
> Lenovo USB driver & QPST Tools
> Lenovo Firmware Image
CLICK HERE TO DOWNLOAD
Installations
-----------------------
> Extract the downloaded archive using any archive software like winRAR or 7zip etc.
> Better put the extracted folder to the desktop [optional].
> Disconnect your phone from pc, if connected.
> Now go inside drivers folder and install lenovo usb driver.
> While installing usb driver, if windows security message pop-up then choose install the driver anyway and proceed.
> Then install the Qualcomm usb driver.
> After driver installation, go to Tools folder and run the setup.exe to install msvc++ redist.
> After the installation, run the QPST2.7.437.exe installer and install the software.
Flashing procedure /* AT YOUR OWN RISK */
------------------------
> Switch off your phone
> Now press and hold the vol+ and vol- button simultaneously and connect the phone to PC.
(Your phone will turn on with nothing being displayed on your phone)
> Wait for the driver to be installed.
> If the driver installation is successful then you will see your device port listed in device manager
under Ports (COM & LTP) > Qualcomm HS-USB QDLoader 9XXX (COMX)
Screenshot of Device Manager
> Now in windows goto Start>All Programs>QPST and open/run QFIL application
( In QIFL application )
> select on Flat Build
> Now click on browse button for programmer path and select on "prog_emmc_firehose_8936.mbn" file which is located in extracted folder/images/
> Now click on Load XML button and select rawprogram0 file and then select patch0 file which is also located in the extracted folder/images/
Here is a screenschot
> Now click on select port button
> Then select your port and click ok.
>> NOW YOUR PC IS READY TO FLASH <<
> Now click on download button to flash.
[ A blue progress bar will display the progress ]
[ If the status is saying invalid path then close the program and select the files and try again ]
> After the flashing is done (check status), remove your phone from pc.
> Remove and reinsert phone's battery and press power button to turn it on.
> Done.
from xda-developers http://ift.tt/2ckI2Hk
via IFTTT
No comments:
Post a Comment