Hi, many people have their hands on the HTC 10, and you may found out that wiping data after rooted with SuperSU, your signal will be broken.
This is caused by the fact that by default, SuperSU's flashing script will change the data encryption flag from "forceencrypt" to "encryptable". If you wiped data after the flag is set to "encryptable", your data partition will be decrypted. In many times, decrypted data is good, but on the HTC 10, for some unknown reason the signal will break with data decrypted.
More info here:
[PSA][MUST SEE] New HTC Policy : Things You Should Know Before Unlocking Bootloader
This issue has caught more attention after an S-OFF method is available. You're required to have root and wipe data after gaining S-OFF. The developer of the S-OFF tool has created a tutorial for this particular problem, you can find it here:
[Guide] Root (Optionally s-off) and Keep your radio working
Here I come up with a more elegant solution. I slightly modified the SuperSU flashing script, so now it won't change the encryption flag, and also won't remove dm-verify.
NOTE: If your boot image is already modified, it will not reset the flag back to forceencrypt. You have to restore to the stock boot image, then flash this zip. The way I accomplished this is reverting a few modification from the previous ramdisk, so the ramdisk itself has to be stock.
Devs can include this zip into their rom, so users can wipe their whole data with your rom installed.
This zip will be useful until we find a way to decrypt our data partition with working signal.
This is caused by the fact that by default, SuperSU's flashing script will change the data encryption flag from "forceencrypt" to "encryptable". If you wiped data after the flag is set to "encryptable", your data partition will be decrypted. In many times, decrypted data is good, but on the HTC 10, for some unknown reason the signal will break with data decrypted.
More info here:
[PSA][MUST SEE] New HTC Policy : Things You Should Know Before Unlocking Bootloader
This issue has caught more attention after an S-OFF method is available. You're required to have root and wipe data after gaining S-OFF. The developer of the S-OFF tool has created a tutorial for this particular problem, you can find it here:
[Guide] Root (Optionally s-off) and Keep your radio working
Here I come up with a more elegant solution. I slightly modified the SuperSU flashing script, so now it won't change the encryption flag, and also won't remove dm-verify.
NOTE: If your boot image is already modified, it will not reset the flag back to forceencrypt. You have to restore to the stock boot image, then flash this zip. The way I accomplished this is reverting a few modification from the previous ramdisk, so the ramdisk itself has to be stock.
Devs can include this zip into their rom, so users can wipe their whole data with your rom installed.
This zip will be useful until we find a way to decrypt our data partition with working signal.
from xda-developers http://ift.tt/1TM6Lka
via IFTTT
No comments:
Post a Comment